Engenius EAP1300EXT indoor access point

EnGenius EAP1300EXT indoor access point MU MIMO 2,4 e 5 GHz

EnGenius EAP1300EXT è un access point da interno con antenne SMA  e alimentatore PoE inclusi.

EAP1300ext è un access point indoor con tecnologia MU-MIMO per alta densità per installazioni multiple e svariate applicazioni.

La soluzione EnGenius Wireless Management Access Point è progettata  per installazioni semplici e veloci all'interno di edifici.

Engenius propone soluzioni affidabili, robuste e semplici da installare e da gestire nel postvendita.

Engenius EAP1300 e EAP1300EXT sono access point con modulo RF avanzato, potente e forniscono funzionalità multiutente (multiple input multiple output - mu mimo).
La tecnologia MU-MIMO consente la condivisione della connettività tra più utenti simultaneamente, mantenendo una ridotta latenza e incrementando il throughput della wireless LAN.
Questo a vantaggio dell'efficienza.

con la tecnologia MU-MIMO (Beamforming technology), l'access spoint indoor EAP1300 può gestire un intenso traffico e coprire una vasta area.

Caratteristiche principali Engenius EAP1300

• Built-in Turbo Engine solution with powerful Quad-core chipset
• Dual radio 2x2 802.11 ac/a/b/g/n AP with MU-MIMO
• Up to 867 Mbps on the 5Ghz band
• Up to 400 Mbps on the 2.4 GHz band
• High powered amplifiers to improve wireless coverage
• Support 802.11ac Wave 2.0 technology
• 802.3af PoE Compliant
• External RP-SMA 360° omni-directional antennas
• 5dBi antennas
• Multiple operation modes

Dettagli tecnici EAP 1300 Engenius

Wireless Radio Specification

• Access Point Type:
• Indoor, dual radios concurrent, 5GHz 802.11 ac 2x2 MIMO is back-wards compatible with 802.11 a/n mode, 2.4GHz 802.11 n 2x2 MIMO is backwards compatible with 802.11 b/g.
• SU-MIMO:
• Two(1) spatial stream SU-MIMO for up to 1,267 Mbps wireless data rate to a single wireless client device.
• MU-MIMO
• Two(1) spatial stream MU-MIMO for up to 867 Mbps wireless data rate to transmit to two(2) MU-MIMO capable wireless client devices simultane-ously.

Frequency Radio

• 2.4GHz: 2400MHz ~ 2835MHz,
• 5GHz: 5150MHz~5250MHz, 5250MHz~5350MHz, 5470~5725MHz, 5725MHz~5850MHz
• Support radios and channels will be varied on the configured regulatory domain.
• Supported Radio Technology
• 802.11b: Direct-sequence spread-spectrum (DSSS)
• 802.11ac/a/g/n: Orthogonal frequency-division multiplexing (OFDM)
• 802.11n/ac: 2x2 MIMO with 4 streams
• 802.11ac supports very high throughput (VHT) — VHT 20/40/80 MHz
• 802.11n supports high throughput (HT) — HT 20/40 MHz
• 802.11n supports very high throughput under the 2.4GHz radio –VHT40 MHz (256-QAM)
• 802.11n/ac packet aggregation: A-MPDU, A-SPDU

Supported Modulation Type

• 802.11b: BPSK, QPSK, CCK
• 802.11a/g/n: BPSK, QPSK, 16-QAM, 64-QAM
• 802.11ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM
• Transmit Power (Maximum Value)
• 2.4GHz: 21dBm
• 5GHz: 21dBm
• Maximum power is limited by regulatory domain
• Tx Beamforming (TxBF)
• Increasing signal reliability and transmitting distance.

Supported data rates (Mbps)

• 802.11b: 1, 2, 5.5, 11
• 802.11a/g: 6, 9, 12, 18, 36, 48, 54
• 802.11n: 6.5 to 300 (MCS0 to MCS15)
• 802.11ac: 6.5 to 867 (MCS0 to MCS9, NSS=1 to 2)

Power

• Maximum Power Consumption10W
• Power Source
• Direct DC Input: 12V/1A
• Power Over Ethernet: 802.3af Input

Antenna

• EAP1300: (Integrated Antenna)
• 2.4GHz: 5 .0 dBi
• 5GHz: 5.0 dBi
• EAP1300EXT: (External Antenna)

   

• 2.4GHz: Two detachable 5.0dBi RP-SMA antennas
• 5GHz: Two detachable 5.0dBi RP-SMA antennas

Interfaces

• Networking Interface

   

• One (1) 10/100/1000 BASE-T RJ-45 Ethernet Ports
• DC Powering Interface
• One (1) DC Jack interface

LED Indicators

• Display system and wireless transmission status
• Reset Button
• Convert Access Point to the Factory default or the Users Default

Traffic Shaping

• Controls the bottle of bandwidth to offer the limited bandwidth for an individual SSID or each client per Access Point.
• MAC Address Filtering
• Filter up to 64 sets MAC addresses per SSID
• E-Mail Alert
• Provides a network monitoring tool for administrators to stay informed the configuration change.
• Finger Printing
• The value added solution collect information of client devices including name of devices, IP address, MAC address, Operating system version, transmitting and receiving data, and signal level.
• Save Configuration as Users Default
• Save the customized configuration as default value for different customer demands.
• Wi-Fi Scheduler
• Perform a regular reboot on access point at assigned schedule
• Perform it to enable or disable 2.4GHz or 5GHz interface from a period time.
• SNMP &MIB
• v1/v2c/v3 support
• MIB I/II, Private MIB
• CLI supported
• RADIUS Accounting
• Help operators to offload 3G to Wi-Fi seamlessly
• Wireless Clients list
• Provide the list to display real status of wireless client devices on this Ac-cess Point.
• Comprehensive Protection
• Wireless Encryption Standard
• Hide SSID in beacons
• Rogue AP Detection
• Enable the function to detect the fake access points in the environment.
• L2 Isolation
• Block the communication between the associated clients to communi-cate with other clients from all hosts on the same subnet.
• Client Isolation
• Block/Isolate the communication between the associated clients under the same WLAN.
• HTTPS
• A secure communication protocol can be enabled to allow secure man-agement web access over a computer network.
• SSH Tunnel
• A secure communication protocol can be enabled to allow secure remote shell access or command execution.

Richiedi un progetto - preventivo al nostro staff

Vedi altri prodotti